Neware Battery Tester BTS Client8.0-Device List Introduction
Default local service:127.0.0.1. If you want to access other services,select any service IP and right click “Add server”, you also can add and modify notes on it. (Shown in the following figure)
In this case, you can add devices connected to computers with different IP addresses in the LAN, by the BTSClient of the current computer.
Notes: Adding server is not allowed in the mode of automatic production line.
Move the mouse cursor at server IP, you can see the information of server version.(Shown in the following figure)
Delete offline device:
Image will be displayed after the device offline.If you do not wants to display them, you can delete the offline devices. Delete instruction: 1. Choose offline devices in the device list. 2. Right click and choose “Delete”or “Delete all offline devices”.
Notes: Online devices will not be deleted.
Modify remarks information:
Choose the middle machine firstly , right click to modify notes.(Shown in the figure)
Restart middle machine:
The median machine can be sent a restart command through the client software. Restart instruction: 1. Choose device in device list 2. Right click and choose “Restart middle machine”
Set and Show Device
You can see the version and modify the number of middle machine and low machine from client software. Instruction: 1. Choose middle machine in device list. 2. Right click and click “Set and display middle machine and low machine”. Neware BTS 8.0 user manual 48 3. Enter new number of machine,click “Setting”
If the device is equipped with a buzzer, the buzzer will alarm when the channel is protected. At this time, the alarm can be reset by the sound and light alarm reset. Reset instruction: 1. Choose the channel or device 2. Click “Sound-light alarm reset”.
You can view the version formation of each middle machine and low machine. Instruction:
1. Choose middle machine in device list.
2. 2. Right click and choose “Version”