Mr. SAVIN Jean-FrancoisWe have been using Neware benches for testing our primary cells and batteries for several years. We are quite satisfied about the quality of this type of equipment and we find always good and very reactive feedback from their after-sales service to help us in specific case.
Prof. Lv LiWe have been using Neware battery testing system for many years. We are focused on different electrochemical tests of lithium-ion batteries. The Neware machine is easy to be used and the program is easy to set. We have conducted charge-discharge cycling for more than 5000 cycles and the machine showed very good stability, which helped us to obtain
Mr. Frank GroenVarious neware testing systems have been equipped our laboratory for years and serves very good. We use them for many kinds of tests. Easy to handle the tests and data is well organized for our reporting work. The most important thing is the measurement and control are quite accurate and reliable.
500V100A Battery Charge Discharge Tester Equipment 4 Channels
|Discharge Voltage||50V - 500V||Discharge Current||0.2A - 100A|
|Precision||0.05 Percent Of FS||Stability||0.1 Percent Of FS|
|Max Cycles||65535||Max Steps||254|
500V battery charge discharge tester,
4 channels battery charge discharge tester,
4 channels battery pack test equipment
Neware 500V100A Regenerative Battery Pack Testing equipment and Charge Discharge Tester
The CE - 6000 series battery testing system supports channels to expand .
Modularization - Each module is 4 channels 120V50A . Expandable for 8 channels / 12 channels, etc , in one cabinet .
Parallelled , Up to 4 channels to be parallelled connection , can reach 200A in one module .
Regeneration - The regenerative function is included to greatly reduce power consumption during the discharge test .
Communication - Able to log parameters from BMS , Chamber, I / O signals as a condition for cut - off or protection during testing . Support CANbus , RS485 protocol , SMbus , I2C.
Simulation - Because of high dynamic response speed , it supports the profile dynamic simulation , such as DCIR , HPPC , NEDC , FUDC , and other tests .
|Charge modes||Constant current , Constant voltage , Constant current and voltage , Constant power|
|Cut - off condition||Main channel - Voltage , Current , delta Time , Capacity , - delta V|
|Discharge modes||Constant current , Constant voltage , Constant power , Constant resistance|
|Cut - off condition||Main channel - Voltage , Current , delta Time , Capacity|
|Charge||Constant current , Constant power|
|Discharge||Constant current , Constant power|
|Min pulse width||100ms|
|Pulse counts||Each pulse step supports 32 different pulses|
|Chg and Dschg switch||Supported|
|Cut - off condition||Voltage , Time|
|Simulated Condition||Charge modes||Constant current , Constant power|
|Discharge modes||Constant current , Constant power|
|Cut - off condition||Time , Line Number|
|Continuous switching Chg and Dischg||One simulation step can realize a continuous switching from charging to discharging|
|Limit step number||1 million|
|Cycle nest||Nested loop Function , Max Support 3 Layers|
|Power - off data protection|
|Off - line operation mode|
|User - defined protection conditions , such as upper and lower limited current / voltage , delay time , temperature , etc .|
|Charge and discharge efficifency||more than 90 percent|
|Protection||Anti - surge , anti - islanding , over - under - frequency , over - under - voltage , phase - loss protection , etc.|
supported , Parallel channels do not support pulse and simulation testing
|Energy feedback||The discharge energy can be fed back to the power grid|
|Channels feature||Constant Current Source and Constant Voltage Source with Independent pairs of Closed-loop Structure|
|Channels control mode||Independent control|
|Operating system||Windows 7/8/10 64bit|
|Data export||EXCEL, TXT|
|Min. disk drive||500GB|
|Communication port||Ethernet port|