-
Battery Cycle Tester
-
Battery Cell Cycler
-
Battery Cycler System
-
Lithium Ion Battery Analyzer
-
Battery Capacity Discharge Tester
-
18650 Battery Charger Capacity Tester
-
8 Channel Battery Analyzer
-
Battery Cell Tester
-
Regenerative Battery Pack Test System
-
Neware Battery Test System
-
EV Battery Testing Equipment
-
Battery Grading System
-
Battery Test Chamber
-
Mr. SAVIN Jean-FrancoisWe have been using Neware benches for testing our primary cells and batteries for several years. We are quite satisfied about the quality of this type of equipment and we find always good and very reactive feedback from their after-sales service to help us in specific case.
-
Prof. Lv LiWe have been using Neware battery testing system for many years. We are focused on different electrochemical tests of lithium-ion batteries. The Neware machine is easy to be used and the program is easy to set. We have conducted charge-discharge cycling for more than 5000 cycles and the machine showed very good stability, which helped us to obtain
-
Mr. Frank GroenVarious neware testing systems have been equipped our laboratory for years and serves very good. We use them for many kinds of tests. Easy to handle the tests and data is well organized for our reporting work. The most important thing is the measurement and control are quite accurate and reliable.
24bit Electric Crane 60V 200A Regenerative Battery Pack Test System

Contact me for free samples and coupons.
Whatsapp:0086 18588475571
Wechat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xVoltage Range | 3V - 60V | Current Range | 1A - 200A |
---|---|---|---|
Resolution | 24bit | DCIR | Supported |
Charge Modes | CC , CV , CCCV , CP , Pulse , SIM , Etc | Max Steps | 254 |
High Light | 60V Regenerative Battery Pack Test System,24bit Regenerative Battery Pack Test System,200A Battery Cell Test Equipment |
Electric Crane 60V200A Regenerative Battery Pack Test System
CE - 6000 module pack testing system is a high - precision charging and discharging equipment specially developed for high - power battery pack testing .
It has the characteristics of high dynamic response speed , high stability precision , multi - channel flexible configuration and so on . It supports pulse testing , cycle life testing and working condition simulation testing .
The system has the function of multi - channel input and energy recovery , which can save a lot of electric energy consumed in the process of charging and discharging . Using bidirectional high - frequency DC converter topology and high - performance multi - channel 24 bit AD converter chip , the sampling resolution is higher than that of traditional single range equipment .
CE-6000 series battery testing system
Product introduction
Power battery simulation test, rate test .
Cycle life test .
Power, capacity and energy detection .
Virtual configuration of power battery pack: charge and discharge curve fitting, battery consistency detection and evaluation;
High rate charge and discharge ability detection .
Power battery, energy storage battery series module detection: monomer voltage, monomer temperature monitoring - high voltage equipment .
Pulse |
Charge | Constant current , Constant power |
Discharge | Constant current , Constant power | |
Min pulse width | 100ms | |
Pulse counts | Each pulse step supports 32 different pulses | |
Chg and Dschg switch | Supported | |
Cut - off condition | Voltage , Time | |
Simulated Condition | Charge modes | Constant current , Constant power |
Discharge modes | Constant current , Constant power | |
Cut - off condition | Time , Line Number | |
Continuous switching Chg and Dischg | One simulation step can realize a continuous switching from charging to discharging | |
Limit step number | 1 million | |
Charge and discharge efficifency | more than 90 percent | |
Protection | Anti - surge , anti - islanding , over - under - frequency , over - under - voltage , phase - loss protection , etc. | |
Protection grade | IP20 | |
Channel parallel |
supported , Parallel channels do not support pulse and simulation testing |
|
Energy feedback | The discharge energy can be fed back to the power grid |
Channels feature | Constant Current Source and Constant Voltage Source with Independent pairs of Closed-loop Structure |
Channels control mode | Independent control |
Noise | ≤65dB |
Database | MySQL |
Communication | TCP/IP |
Operating system | Windows 7/8/10 64bit |
Data export | EXCEL, TXT |
Min. disk drive | 500GB |
Communication port | Ethernet port |