Lithium ion Battery Cycler System, CR1220 CR1620 Coin Cells Battery Tester
a . Want to use a battery tester for all kinds of purposes , wanna give it a shot with low risk , BTS4000 is very possibly the correct choice for you to get to know Neware and her battery test products better . Till year 2017 , 90% new customers of Neware would choose BTS4000 as a starting point , its really the time - proven and reliable choice .
b . Higher Accuracy . More Cost-effective. We believe it can improve your battery test .
c . Neware Battery Charge and Discharge Test System , ranging from μA single cell applications up to 1MW packs , is a high precision system designed specifically for testing lithium ion battery cells , modules , packs and capacitors .
d . It is suitable for product development , quality control , and helpful to characteristic research , cycle life testing, product screening , and quality assessment .
Channel Features |
Constant Current Source and Constant Voltage Source with Independent pairs of Closed - loop Structure |
Voltage |
Per Channel Voltage Range |
0V - 5V |
Discharge Min Voltage |
0V |
Power |
Per Channel Output Power |
0.25W |
Stop current |
Range 1 , 2uA Range 2 , 0.05mA Range 3 , 0.1mA |
Stability |
0.1percent of FS |
Data Recording |
Record Condition |
Min Time - 100mS |
Min Voltage - 10mV |
Min Current - Range 1 , 2uA Range 2 , 0.05mA Range 3 , 0.1mA |
Record Frequency |
10Hz |
Charge |
Charge Mode |
CCCharge , CVCharge , CCCVCharge , CPCharge |
End Conditon |
Voltage , Current , Relative Time , Capacity , -deltaV |
Discharge |
Discharge Mode |
CCD , CPD , CRD |
End Condition |
Voltage , Current , Relative Time , Capacity |
Pulse |
charge |
CCC , CPC |
Discharge |
CCD , CPD |
Min Pulse Width |
500ms |
Automated Switch |
Automated swith from charge to discharge for each pulse |
End Condition |
Voltage, Test Time |
Cycle |
Loop Measure Range |
65535 times |
Max Steps Per Loop |
254 |
Protection |
Software Protection |
Power - down Data Protection |
Off - line Testing Function |
Setting Protection Condition,Setting Parameter - Low Voltage limit , Upper Voltage limit , Low Current limit , Upper Current limit , Delay Time |
IP protection level |
Protection level IP20 |
A Means of Communication of Upper Machine |
TCP / IP Protocol |
Communication Interface |
Ethernet Port |
|
